The content below is taken from the original ( Perhaps The Ultimate Raspberry Pi Case: Your PC), to continue reading please visit the site. Remember to respect the Author & Copyright.

One of the great joys of owning a 3D printer is being able to print custom cases for boards like the Raspberry Pi. What’s more, if you are using a desktop PC, you probably don’t have as many PCI cards in it as you used to. Everything’s moved to the motherboard. [Sneekystick] was using a Pi with a PC and decided the PC itself would make a great Pi case. He designed a bracket and it looks handy.

The bracket just holds the board in place. It doesn’t connect to the PC. The audio, HDMI, and power jacks face out for access. It would be tempting and possible to power the board from the PC supply, but to do that you have to be careful. Connecting the GPIO pins to 5V will work, but bypasses the input protection circuitry. We’ve read that you can find solder points near the USB plug and connect there, but if you do, you should block out the USB port. It might be nice to fill in that hole in the bracket if you planned to do that.

Of course, it isn’t hard to sequester a Pi inside a hard drive bay or some other nook or cranny, but the bracket preserves at least some of the output connectors. If you are really wanting to bury a Pi in a piece of gear, you can always design a custom board and fit a “compute module” in it. These are made to embed which means they have a row of pins instead of any I/O connectors. Of course, that also means more real work if you need any of those connectors.

We’ve seen cases that aim to turn the Pi into a desktop PC before. We’ve also seen those compute modules jammed into Game Boy cases more than once.